[. . . ] Driver CD *1 Driver and Hardware Installation For Windows XP/2000 system, drivers are provided by the operating systems, no vendor-supplied driver needed. [. . . ] Driver Installation (for Windows 98 System only) Follow the installation guide below to complete the driver installation. Put the Driver CD into the CD-ROM, and double click “AM-Reader-98Drv-Setup”. Click “finish”to complete the installation You will see four removable disk icons of the all-in-1 card reader on the explorer window once you connect your card reader to the PC. The disk drive letters (F:~I:)in the figure shown below are determined by the PC’s configuration which may varies. Please arrange the 4 pins as +5V 、-D 、+D 、GROUND from left to right, and insert it into the internal correspondent port on the motherboard as shown below. Connect the two SATA connectors to the correspondent ports on the motherboard as shown below (attention: these connectors have been particularly designed and can be connected only in the proper way). The yellow RCA connector should connect to the correspondent Video port in the PC. Finish hardware installation Check the connecting with no problem and turn on the computer, you will find that the light of “POWER” is on. [. . . ] Finish hardware installation Check the connecting with no problem and turn on the computer, you will find that the light of “POWER” is on. [. . . ]